// Copyright 2016-2018 Espressif Systems (Shanghai) PTE LTD
|
//
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
// you may not use this file except in compliance with the License.
|
// You may obtain a copy of the License at
|
//
|
// http://www.apache.org/licenses/LICENSE-2.0
|
//
|
// Unless required by applicable law or agreed to in writing, software
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
// See the License for the specific language governing permissions and
|
// limitations under the License.
|
|
#pragma once
|
|
#include "soc.h"
|
|
/**
|
* This file lists peripheral registers of an I2C controller which is part of the RTC.
|
* ULP coprocessor uses this controller to implement I2C_RD and I2C_WR instructions.
|
*
|
* Part of the functionality of this controller (such as slave mode, and multi-byte
|
* transfers) is not wired to the ULP, and is such, is not available to the
|
* ULP programs.
|
*/
|
|
#define RTC_I2C_SCL_LOW_PERIOD_REG (DR_REG_RTC_I2C_BASE + 0x000)
|
/* RTC_I2C_SCL_LOW_PERIOD : R/W ;bitpos:[18:0] ;default: 19'b0 ; */
|
/*description: number of cycles that scl == 0 */
|
#define RTC_I2C_SCL_LOW_PERIOD 0x1FFFFFF
|
#define RTC_I2C_SCL_LOW_PERIOD_M ((RTC_I2C_SCL_LOW_PERIOD_V)<<(RTC_I2C_SCL_LOW_PERIOD_S))
|
#define RTC_I2C_SCL_LOW_PERIOD_V 0x1FFFFFF
|
#define RTC_I2C_SCL_LOW_PERIOD_S 0
|
|
#define RTC_I2C_CTRL_REG (DR_REG_RTC_I2C_BASE + 0x004)
|
/* RTC_I2C_RX_LSB_FIRST : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
/*description: Send LSB first */
|
#define RTC_I2C_RX_LSB_FIRST BIT(7)
|
#define RTC_I2C_RX_LSB_FIRST_M BIT(7)
|
#define RTC_I2C_RX_LSB_FIRST_V (1)
|
#define RTC_I2C_RX_LSB_FIRST_S (7)
|
/* RTC_I2C_TX_LSB_FIRST : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
/*description: Receive LSB first */
|
#define RTC_I2C_TX_LSB_FIRST BIT(6)
|
#define RTC_I2C_TX_LSB_FIRST_M BIT(6)
|
#define RTC_I2C_TX_LSB_FIRST_V (1)
|
#define RTC_I2C_TX_LSB_FIRST_S (6)
|
/* RTC_I2C_TRANS_START : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
/*description: Force to generate start condition */
|
#define RTC_I2C_TRANS_START BIT(5)
|
#define RTC_I2C_TRANS_START_M BIT(5)
|
#define RTC_I2C_TRANS_START_V (1)
|
#define RTC_I2C_TRANS_START_S (5)
|
/* RTC_I2C_MS_MODE : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
/*description: Master (1) or slave (0) */
|
#define RTC_I2C_MS_MODE BIT(4)
|
#define RTC_I2C_MS_MODE_M BIT(4)
|
#define RTC_I2C_MS_MODE_V (1)
|
#define RTC_I2C_MS_MODE_S (4)
|
/* RTC_I2C_SCL_FORCE_OUT : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
/*description: SCL is push-pull (1) or open-drain (0) */
|
#define RTC_I2C_SCL_FORCE_OUT BIT(1)
|
#define RTC_I2C_SCL_FORCE_OUT_M BIT(1)
|
#define RTC_I2C_SCL_FORCE_OUT_V (1)
|
#define RTC_I2C_SCL_FORCE_OUT_S (1)
|
/* RTC_I2C_SDA_FORCE_OUT : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
/*description: SDA is push-pull (1) or open-drain (0) */
|
#define RTC_I2C_SDA_FORCE_OUT BIT(0)
|
#define RTC_I2C_SDA_FORCE_OUT_M BIT(0)
|
#define RTC_I2C_SDA_FORCE_OUT_V (1)
|
#define RTC_I2C_SDA_FORCE_OUT_S (0)
|
|
#define RTC_I2C_DEBUG_STATUS_REG (DR_REG_RTC_I2C_BASE + 0x008)
|
/* RTC_I2C_SCL_STATE : R/W ;bitpos:[30:28] ;default: 3'b0 ; */
|
/*description: state of SCL state machine */
|
#define RTC_I2C_SCL_STATE 0x7
|
#define RTC_I2C_SCL_STATE_M ((RTC_I2C_SCL_STATE_V)<<(RTC_I2C_SCL_STATE_S))
|
#define RTC_I2C_SCL_STATE_V 0x7
|
#define RTC_I2C_SCL_STATE_S 28
|
/* RTC_I2C_MAIN_STATE : R/W ;bitpos:[27:25] ;default: 3'b0 ; */
|
/*description: state of the main state machine */
|
#define RTC_I2C_MAIN_STATE 0x7
|
#define RTC_I2C_MAIN_STATE_M ((RTC_I2C_MAIN_STATE_V)<<(RTC_I2C_MAIN_STATE_S))
|
#define RTC_I2C_MAIN_STATE_V 0x7
|
#define RTC_I2C_MAIN_STATE_S 25
|
/* RTC_I2C_BYTE_TRANS : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
/*description: 8 bit transmit done */
|
#define RTC_I2C_BYTE_TRANS BIT(6)
|
#define RTC_I2C_BYTE_TRANS_M BIT(6)
|
#define RTC_I2C_BYTE_TRANS_V (1)
|
#define RTC_I2C_BYTE_TRANS_S (6)
|
/* RTC_I2C_SLAVE_ADDR_MATCH : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
/*description: When working as a slave, whether address was matched */
|
#define RTC_I2C_SLAVE_ADDR_MATCH BIT(5)
|
#define RTC_I2C_SLAVE_ADDR_MATCH_M BIT(5)
|
#define RTC_I2C_SLAVE_ADDR_MATCH_V (1)
|
#define RTC_I2C_SLAVE_ADDR_MATCH_S (5)
|
/* RTC_I2C_BUS_BUSY : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
/*description: operation is in progress */
|
#define RTC_I2C_BUS_BUSY BIT(4)
|
#define RTC_I2C_BUS_BUSY_M BIT(4)
|
#define RTC_I2C_BUS_BUSY_V (1)
|
#define RTC_I2C_BUS_BUSY_S (4)
|
/* RTC_I2C_ARB_LOST : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
/*description: When working as a master, lost control of I2C bus */
|
#define RTC_I2C_ARB_LOST BIT(3)
|
#define RTC_I2C_ARB_LOST_M BIT(3)
|
#define RTC_I2C_ARB_LOST_V (1)
|
#define RTC_I2C_ARB_LOST_S (3)
|
/* RTC_I2C_TIMED_OUT : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
/*description: Transfer has timed out */
|
#define RTC_I2C_TIMED_OUT BIT(2)
|
#define RTC_I2C_TIMED_OUT_M BIT(2)
|
#define RTC_I2C_TIMED_OUT_V (1)
|
#define RTC_I2C_TIMED_OUT_S (2)
|
/* RTC_I2C_SLAVE_RW : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
/*description: When working as a slave, the value of R/W bit received */
|
#define RTC_I2C_SLAVE_RW BIT(1)
|
#define RTC_I2C_SLAVE_RW_M BIT(1)
|
#define RTC_I2C_SLAVE_RW_V (1)
|
#define RTC_I2C_SLAVE_RW_S (1)
|
/* RTC_I2C_ACK_VAL : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
/*description: The value of an acknowledge signal on the bus */
|
#define RTC_I2C_ACK_VAL BIT(0)
|
#define RTC_I2C_ACK_VAL_M BIT(0)
|
#define RTC_I2C_ACK_VAL_V (1)
|
#define RTC_I2C_ACK_VAL_S (0)
|
|
#define RTC_I2C_TIMEOUT_REG (DR_REG_RTC_I2C_BASE + 0x00c)
|
/* RTC_I2C_TIMEOUT : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
|
/*description: Maximum number of FAST_CLK cycles that the transmission can take */
|
#define RTC_I2C_TIMEOUT 0xFFFFF
|
#define RTC_I2C_TIMEOUT_M ((RTC_I2C_TIMEOUT_V)<<(RTC_I2C_TIMEOUT_S))
|
#define RTC_I2C_TIMEOUT_V 0xFFFFF
|
#define RTC_I2C_TIMEOUT_S 0
|
|
#define RTC_I2C_SLAVE_ADDR_REG (DR_REG_RTC_I2C_BASE + 0x010)
|
/* RTC_I2C_SLAVE_ADDR_10BIT : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
/*description: Set if local slave address is 10-bit */
|
#define RTC_I2C_SLAVE_ADDR_10BIT BIT(31)
|
#define RTC_I2C_SLAVE_ADDR_10BIT_M BIT(31)
|
#define RTC_I2C_SLAVE_ADDR_10BIT_V (1)
|
#define RTC_I2C_SLAVE_ADDR_10BIT_S (31)
|
/* RTC_I2C_SLAVE_ADDR : R/W ;bitpos:[14:0] ;default: 15'b0 ; */
|
/*description: local slave address */
|
#define RTC_I2C_SLAVE_ADDR 0x7FFF
|
#define RTC_I2C_SLAVE_ADDR_M ((RTC_I2C_SLAVE_ADDR_V)<<(RTC_I2C_SLAVE_ADDR_S))
|
#define RTC_I2C_SLAVE_ADDR_V 0x7FFF
|
#define RTC_I2C_SLAVE_ADDR_S 0
|
|
/* Result of last read operation. Not used directly as the data will be
|
* returned to the ULP. Listed for debugging purposes.
|
*/
|
#define RTC_I2C_DATA_REG (DR_REG_RTC_I2C_BASE + 0x01c)
|
|
/* Interrupt registers; since the interrupt from RTC_I2C is not connected,
|
* these registers are only listed for debugging purposes.
|
*/
|
|
/* Interrupt raw status register */
|
#define RTC_I2C_INT_RAW_REG (DR_REG_RTC_I2C_BASE + 0x020)
|
/* RTC_I2C_TIME_OUT_INT_RAW : R/O ;bitpos:[7] ;default: 1'b0 ; */
|
/*description: time out interrupt raw status */
|
#define RTC_I2C_TIME_OUT_INT_RAW BIT(7)
|
#define RTC_I2C_TIME_OUT_INT_RAW_M BIT(7)
|
#define RTC_I2C_TIME_OUT_INT_RAW_V (1)
|
#define RTC_I2C_TIME_OUT_INT_RAW_S (7)
|
/* RTC_I2C_TRANS_COMPLETE_INT_RAW : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
/*description: Stop condition has been detected interrupt raw status */
|
#define RTC_I2C_TRANS_COMPLETE_INT_RAW BIT(6)
|
#define RTC_I2C_TRANS_COMPLETE_INT_RAW_M BIT(6)
|
#define RTC_I2C_TRANS_COMPLETE_INT_RAW_V (1)
|
#define RTC_I2C_TRANS_COMPLETE_INT_RAW_S (6)
|
/* RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
/*description: */
|
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW BIT(5)
|
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW_M BIT(5)
|
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW_V (1)
|
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW_S (5)
|
/* RTC_I2C_ARBITRATION_LOST_INT_RAW : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
/*description: Master lost arbitration */
|
#define RTC_I2C_ARBITRATION_LOST_INT_RAW BIT(4)
|
#define RTC_I2C_ARBITRATION_LOST_INT_RAW_M BIT(4)
|
#define RTC_I2C_ARBITRATION_LOST_INT_RAW_V (1)
|
#define RTC_I2C_ARBITRATION_LOST_INT_RAW_S (4)
|
/* RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
/*description: Slave accepted 1 byte and address matched */
|
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW BIT(3)
|
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW_M BIT(3)
|
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW_V (1)
|
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW_S (3)
|
|
/* Interrupt clear register */
|
#define RTC_I2C_INT_CLR_REG (DR_REG_RTC_I2C_BASE + 0x024)
|
/* RTC_I2C_TIME_OUT_INT_CLR : W/O ;bitpos:[8] ;default: 1'b0 ; */
|
/*description: */
|
#define RTC_I2C_TIME_OUT_INT_CLR BIT(8)
|
#define RTC_I2C_TIME_OUT_INT_CLR_M BIT(8)
|
#define RTC_I2C_TIME_OUT_INT_CLR_V (1)
|
#define RTC_I2C_TIME_OUT_INT_CLR_S (8)
|
/* RTC_I2C_TRANS_COMPLETE_INT_CLR : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
/*description: */
|
#define RTC_I2C_TRANS_COMPLETE_INT_CLR BIT(7)
|
#define RTC_I2C_TRANS_COMPLETE_INT_CLR_M BIT(7)
|
#define RTC_I2C_TRANS_COMPLETE_INT_CLR_V (1)
|
#define RTC_I2C_TRANS_COMPLETE_INT_CLR_S (7)
|
/* RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
/*description: */
|
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR BIT(6)
|
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR_M BIT(6)
|
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR_V (1)
|
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR_S (6)
|
/* RTC_I2C_ARBITRATION_LOST_INT_CLR : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
/*description: */
|
#define RTC_I2C_ARBITRATION_LOST_INT_CLR BIT(5)
|
#define RTC_I2C_ARBITRATION_LOST_INT_CLR_M BIT(5)
|
#define RTC_I2C_ARBITRATION_LOST_INT_CLR_V (1)
|
#define RTC_I2C_ARBITRATION_LOST_INT_CLR_S (5)
|
/* RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
/*description: */
|
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR BIT(4)
|
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR_M BIT(4)
|
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR_V (1)
|
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR_S (4)
|
|
/* Interrupt enable register.
|
* Bit definitions are not given here, because interrupt functionality
|
* of RTC_I2C is not used.
|
*/
|
#define RTC_I2C_INT_EN_REG (DR_REG_RTC_I2C_BASE + 0x028)
|
|
/* Masked interrupt status register.
|
* Bit definitions are not given here, because interrupt functionality
|
* of RTC_I2C is not used.
|
*/
|
#define RTC_I2C_INT_ST_REG (DR_REG_RTC_I2C_BASE + 0x02c)
|
|
#define RTC_I2C_SDA_DUTY_REG (DR_REG_RTC_I2C_BASE + 0x030)
|
/* RTC_I2C_SDA_DUTY : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
|
/*description: Number of FAST_CLK cycles SDA will switch after falling edge of SCL */
|
#define RTC_I2C_SDA_DUTY 0xFFFFF
|
#define RTC_I2C_SDA_DUTY_M ((RTC_I2C_SDA_DUTY_V)<<(RTC_I2C_SDA_DUTY_S))
|
#define RTC_I2C_SDA_DUTY_V 0xFFFFF
|
#define RTC_I2C_SDA_DUTY_S 0
|
|
#define RTC_I2C_SCL_HIGH_PERIOD_REG (DR_REG_RTC_I2C_BASE + 0x038)
|
/* RTC_I2C_SCL_HIGH_PERIOD : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
|
/*description: Number of FAST_CLK cycles for SCL to be high */
|
#define RTC_I2C_SCL_HIGH_PERIOD 0xFFFFF
|
#define RTC_I2C_SCL_HIGH_PERIOD_M ((RTC_I2C_SCL_HIGH_PERIOD_V)<<(RTC_I2C_SCL_HIGH_PERIOD_S))
|
#define RTC_I2C_SCL_HIGH_PERIOD_V 0xFFFFF
|
#define RTC_I2C_SCL_HIGH_PERIOD_S 0
|
|
#define RTC_I2C_SCL_START_PERIOD_REG (DR_REG_RTC_I2C_BASE + 0x040)
|
/* RTC_I2C_SCL_START_PERIOD : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
|
/*description: Number of FAST_CLK cycles to wait before generating start condition */
|
#define RTC_I2C_SCL_START_PERIOD 0xFFFFF
|
#define RTC_I2C_SCL_START_PERIOD_M ((RTC_I2C_SCL_START_PERIOD_V)<<(RTC_I2C_SCL_START_PERIOD_S))
|
#define RTC_I2C_SCL_START_PERIOD_V 0xFFFFF
|
#define RTC_I2C_SCL_START_PERIOD_S 0
|
|
#define RTC_I2C_SCL_STOP_PERIOD_REG (DR_REG_RTC_I2C_BASE + 0x044)
|
/* RTC_I2C_SCL_STOP_PERIOD : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
|
/*description: Number of FAST_CLK cycles to wait before generating stop condition */
|
#define RTC_I2C_SCL_STOP_PERIOD 0xFFFFF
|
#define RTC_I2C_SCL_STOP_PERIOD_M ((RTC_I2C_SCL_STOP_PERIOD_V)<<(RTC_I2C_SCL_STOP_PERIOD_S))
|
#define RTC_I2C_SCL_STOP_PERIOD_V 0xFFFFF
|
#define RTC_I2C_SCL_STOP_PERIOD_S 0
|
|
/* A block of 16 RTC_I2C_CMD registers which describe I2C operation to be
|
* performed. Unused when ULP is controlling RTC_I2C.
|
*/
|
#define RTC_I2C_CMD_REG_COUNT 16
|
#define RTC_I2C_CMD_REG(i) (DR_REG_RTC_I2C_BASE + 0x048 + (i) * 4)
|
/* RTC_I2C_CMD_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
/*description: Bit is set by HW when command is done */
|
#define RTC_I2C_CMD_DONE BIT(31)
|
#define RTC_I2C_CMD_DONE_M BIT(31)
|
#define RTC_I2C_CMD_DONE_V (1)
|
#define RTC_I2C_CMD_DONE_S (31)
|
/* RTC_I2C_VAL : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
|
/*description: Command content */
|
#define RTC_I2C_VAL 0
|
#define RTC_I2C_VAL_M ((RTC_I2C_VAL_V)<<(RTC_I2C_VAL_S))
|
#define RTC_I2C_VAL_V 0x3FFF
|
#define RTC_I2C_VAL_S 0
|
